The LM746 and LM747 are both programmable using AT commands via the UART interface. Using AT commands, the host can access Bluetooth functionalities without involving the Bluetooth protocol stack. The AT command reference can be found here.
The default factory firmware settings are:
Baud Rate: 19200
Parity: 0 (None)
Stop Bits: 1
Flow Control: 0 (None)
Deep Sleep Mode: 0 (Disabled)
Local Echo: Enabled
Pin Code: 0000
Name: LM-SRX-ATC
HFP Volume Level: 15
A2DP Volume Level: 8
The LM558 multimedia development kit is designed to evaluate the LM746 / LM747. The product page can be found here.
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article